Call Today 800-627-1033


PT Series (Steel)

Pump Tank Stations

 







A space efficient unit, the PT Series Pump Station utilizes a vertical dimension
 for water storage, and an integral pump platform deck to minimize the floor 
space footprint. The high-flow, high-turbulent pumps offer maximum heat transfer 
across the process.  Designed and engineered for round-the-clock operations,
 the PT Series Pump Station provides maximum return on investment.

 

 

Features:
  • Capacities From 250 to 3600 Gallons
  • Tower or Chilled Water Systems
  • Flows From 40 to 1250 GPM
  • 7 Gallon Steel Reservoir
  • One piece, seamless, cylidrical shape reservoir
  • Water-level Control
  • Hot/Cold section Partition
  • Structural Steel Deck for Pump Mounting
  • Tank Insulation on Chilled Water Systems
  • System can be customized to meet any needs

The PT Series Pump Tank Station is constructed of mild steel that is sand blasted and epoxy coated to provide long life. A stainless steel unit is optional.

The structural steel base and pump platform decking provide minimal footprint to limit the floor space needed. 

Multiple pump connections offer customization of the motor driven cetrifugal pumps that include a bronze impeller, and both suction and discharge service valve kits.

Safety features include overload protection, thermostat controlled tower fan (where applicable) and pre-wirered magnetic pump starts.

Available options include; a standby pump and discharge manifold with isolation valves, a tank service lid, and tank insulation on chilled water applications.

PT Series Pump Station


PT SERIES SPECIFICATIONS
 

PT-275

PT-400

PT-600

PT-750

PT-1000

PT-1250

PT-1500

PT-2000

PT-2500

PT-3000

WATER CAPACITY
(Gallons)
TO OVERFLOW 275 400 600 750 1000 1250 1500 2000 2500 3000
TOWER
WATER
180 240 345 450 560 700 840 1120 1400 1625
CHILLED
WATER
180 300 485 615 790 985 1185 1575 1930 2350
CONNECTIONS WATER
MAKE-UP
1" 1" 1" 1" 1" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2"
TANK
DRAIN
1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2"
TANK
OVERFLOW
4" 4" 4" 4" 4" 4" 4" 6" 6" 6"
DIMENSIONS HEIGHT 55" 55" 67" 79" 79" 79" 79" 79" 79" 79"
WIDTH 60" 60" 72" 72" 72" 72" 72" 72" 72" 144"
DEPTH 24" 36" 36" 36" 48" 60" 72" 96" 120" 72"
DEPTH w/
PUMP BASE
60" 72" 80" 80" 100" 112" 112" 150" 174" 124"
WEIGHT DRY 1625 lbs 1745 lbs 2300 lbs 2800 lbs 3250 lbs 4300 lbs 4500 lbs 4990 lbs 5480 lbs 6580 lbs
OPERATING 3125 lbs 4245 lbs 6340 lbs 7920 lbs 9805 lbs 12505 lbs 14335 lbs 18060 lbs 21500 lbs 26085 lbs
MAXIMUM 3915 lbs 5075 lbs 7925 lbs 9050 lbs 11580 lbs 14715 lbs 17000 lbs 21650 lbs 26300 lbs 31600 lbs
SHIPPING 1725 lbs 1845 lbs 2400 lbs 2920 lbs 3370 lbs 4500 lbs 4700 lbs 5300 lbs 5700 lbs 6750 lbs

P SERIES PUMP SPECIFICATIONS
Process/Standby Pump Model
  PP-2 PP-3 PP-5 PP-7.5 PP-10 PP-15 PP-20 PP-25 PP-30 PP-40 PP-50 PP-60
PUMP HP

2.0

3.0 5.0 7.5 10.0 15.0 20.0 25.0 30.0 40.0 50.0 60.0
GPM/PSI 40/40 60/60 90/60 150/60 210/60 360/60 405/60 525/60 600/60 900/60 1000/60 1250/60
FULL LOAD
AMPERAGE 1
230/3/60 6.8 9.6 15.2 22.0 28.0 42.0 54.0 68.0 84.0 104.0 130.0 154.0
460/3/60 3.4 4.8 7.6 11.0 14.0 21.0 27.0 34.0 42.0 52.0 65.0 77.0
575/3/60 2.7 3.9 6.1 9.0 11.0 17.0 22.0 27.0 32.0 41.0 52.0 62.0

TP SERIES PUMP SPECIFICATIONS
Tower/Evaporator Pump Model
  TP-2 TP-3 TP-5 TP-7.5 TP-10 TP-15 TP-20 TP-25 TP-30 TP-40
PUMP HP

2.0

3.0 5.0 7.5 10.0 15.0 20.0 25.0 30.0 40.0
GPM/PSI 60/30 90/30 210/30 255/30 405/30 525/30 810/30 900/30 1100/30 1750/30
FULL LOAD
AMPERAGE 1
230/3/60 6.8 9.6 15.2 22.0 28.0 42.0 54.0 68.0 84.0 104.0
460/3/60 3.4 4.8 7.6 11.0 14.0 21.0 27.0 34.0 42.0 52.0
575/3/60 2.7 3.9 6.1 9.0 11.0 17.0 22.0 27.0 32.0 41.0

1
Full Load Amps shown. No allowance for in-rush. Full Amps are higher than Run Load Amps and must be used for sizing disconnects and supply wiring



 


Manufacturers of High-Quality
Products for the Plastics Molding Industry

Home | Request a Quote | Place an Order | Product Index | On-line Catalog  
Barrels & Screws | Electrical Products | Hoses & Fittings | Molding Accessories | SDS Sheets
  Credit Application | Terms & Conditions | Newsletter | About Us | Contact Us 
 

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Fax: 800-482-4059 | E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 2007-2017 Services For Plastics, Inc. All rights reserved.