December 2011


Air / Water / Oil
Manifolds

You may not know, but SFP has been here doing this manifold thing for a LOOOONNG time And we have the pictures to prove it!!!

PS&E's Largest Manifolds

(Our Engineers, Tim Hawkins and Jim Hacker. They will probably kill me for this, but the 80s were very good to us!)

 

INLINE

Inline Manifolds

SIDELINE

Sideline Manifold

DIVIDED

Red/Blue Divided Manifold

 

Rugged, Quick Connect External Manifolds 
Offer You Exceptional Convenience, 
Cost and Production Advantages

 

 

FEATURES:

  • Color Coded - Hoses and Manifolds are Color Coded (Red for Hot and Blue for Cold) for Easy Identification (And To Help Eliminate Hookup Errors)
  • Fewer Connections - Reduces Chances of Hookup Errors
  • Variety of Models - Standard or Custom — Virtually Unlimited Combinations Available — We Can Accommodate Almost Any Cooling Pattern
  • Full Flow - For Optimum Efficiency
  • External Mounting - Provides Thermal Barrier Between Mold and Manifold
  • Port Size Selection - May Be Sized for Foolproof Connections (No Accidental Hookup of Cold to Hot or
    Hot to Cold)
  • Pre-Plumbing - Permits Bench Testing of Flow Rates and Checks for Mold Leaks

GENERAL SPECIFICATIONS:

  • Manifolds are in stock or custom drilled to your specifications.
  • Either separate single manifolds may be used for the supply and return flow; or a divided manifold with a divider plate may be used for both the supply and return flow.
  • Manifolds have pre-drilled mounting holes and are furnished with stainless steel mounting screws.
  • Ports can be drilled in from 1 to 5 surfaces - A, B, C, D, and/or E (see drawing A). Custom spacing is available.
  • Manifolds are made from 356 aircraft aluminum.
  • Single manifolds are available in red, blue or black. Divided manifolds are half blue and half red.

Pressure Rating: 3000 psi

Temperature Rating: 300F

 

 

 

M3 Manifold

SPECIFICATIONS:

  • Available in lengths from 2".
  • Made from 1" x 1" stock.
  • Inlet ports are NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/8 or 1/4 NPT.
  • Ports are spaced 1" apart. Custom spacing is also available.
  • Supplied with 10-32 x 1" mounting bolt.
  • -123 O-rings fit End Cap.

More Info on M3 Manifolds

 

M4 Manifold

SPECIFICATIONS:

  • Available in lengths from 3".
  • Made from 2" x 2" stock.
  • Inlet ports are 1 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/4 or 3/8 NPT.
  • Ports are spaced 1" apart. Custom spacing is also available.
  • Supplied with -20 x 2" mounting bolt.
  • -220 O-rings fit End Cap.

More Info on M4 Manifolds

M6 Manifold

SPECIFICATIONS:

  • Available in lengths from 6".
  • Made from 3" x 3" stock.
  • Inlet ports are 1 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/4, 3/8, 1/2, or 3/4 NPT.
  • Ports are spaced 2" apart. Custom spacing is also available.
  • Supplied with -20 x 2" mounting bolt.
  • -226 O-rings fit End Cap.

More Info on M6 Manifolds

 

M8 Manifold

SPECIFICATIONS:

  • Available in lengths from 8".
  • Made from 3" x 3" stock.
  • Inlet ports are 2 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/2, 3/4, or 1 NPT.
  • Ports are spaced 2" apart. Custom spacing is also available.
  • Supplied with -20 x 3" mounting bolt.
  • -230 O-rings fit End Cap.

More Info on M8 Manifolds

 

 



Manifolds with Special Spacing:

Manifolds can be ordered with special 2" port spacing to mount ball valves for positive shut-off.

FEATURES:

  • Use to mount pressure and temperature gauges for peak performance
  • Top quality - low cost
  • Reduce hose lengths and setup time
  • Will not rust

Inline Manifold w/Shut-Off Valves

GENERAL SPECIFICATIONS:

  • Manifolds are in stock or custom drilled to your specifications.

  • Either separate single manifolds may be used for the supply and return flow (see drawing A); or a divided manifold with a divider plate may be used for both the supply and return flow (see drawing B).

  • Manifolds have pre-drilled mounting holes and are furnished with stainless steel mounting screws.

  • Ports can be drilled in from 1 to 5 surfaces - A, B, C, D, and/or E (see drawing C). Custom spacing is available.

  • Manifolds are made from 356 aircraft aluminum.

  • Single manifolds are available in red, blue or black. Divided manifolds are half blue and half red.

Pressure Rating: 3000 psi

Temperature Rating: 300F

 

 

 

 

Our manifolds are comparable with the following brands: A1, Airtx International, Alco, Alkon, Amity Machine, Alumni-Tec, ASCO, Atlas, Ausco, B&R, Bandotherm, Banjo, Bauer, Beco, Birmingham, Bosch, Burger & Brown, CITO Products, Cross Fluid, Daman, DK-Lok, DME, EHA, EMI, Enerpac, Fairchild, Forward Industries, Gar-Kenyon, Harris, Heitec, Hydac, Hydo-Fitting, INCOE, IPT, JP Solutions, Kedron, Kor-Lok, Linfor, Lynch, Magnaloy, Mastip, Mead, Med-Kas, Parker, Parker-Hannifin, PGI, Pisco, Pneumadyne, Pneudraulics, PPE, REO, Ross Controls, Saicad, Selling Precision, Stover, Techno-Jet, Tri Flo, Valve Check, Vektek, Vonberg.


Related Items...

     
     




SERVICES FOR PLASTICS, INC.
Telephone:  800-627-1033 
Fax:  800-482-4059
Internet:  www.servicesforplastics.com
E-mail:  sales@servicesforplastics.com


Services For Plastics, Inc. is a manufacturer of barrels, screws, screw tip assemblies, nozzles, nozzle tips, and end caps for the plastic molding industry. We also distribute a complete line of industrial accessories for the injection, extrusion, thermoset, and blow-molding industries. In addition, we specialize in upsize/downsize conversions, thermoset/thermoplastic conversions, and reconditioning services for barrels and screws.
Copyright  1997-2017 Services For Plastics, Inc. All rights reserved.