Having trouble viewing this email? Click here
Services For Plastics, Inc. Phone: 800.627.1033
Email:  sales@servicesforplastics.com
Web:    www.servicesforplastics.com
 
Dial Bore Gauges & Mitutoyo Micrometers
Dial Bore Gauges allow rapid and accurate checking of bores for size, ovality, taper, wear, etc. All models operate on the proven principle of two diametrically opposed measuring points, one fixed and one moving, plus a spring-loaded centralizing shoe.

To measure the actual size of a bore, the gauge must be set to a size with a bore of a known diameter, or by means of a micrometer measurement over the fixed and moving points. Inserted into the bore, move the gauge slowly up and down to locate its perpendicular measuring axis in relation to the bore, shown by the point of reversal of the indicator hand. The reading at that point is the deviation from set or normal size. A range of interchangeable extension rods allow a single instrument to cover a wide range of bore sizes.

E/Z PurgeĀ® Purging Liquids
PART NO. BORE CAPACITY IN REACH
PSE21010-12 7/8" - 2" 12"
PSE21010-18 7/8" - 2" 18"
PSE21010-24 7/8" - 2" 24"
PSE21010-36 7/8" - 2" 36"
PSE21010-48     7/8" - 2-1/2" 48"
PSE21010-72 7/8" - 2-1/2" 72"
PSE21510-12 2" - 6" 12"
PSE21510-18 2" - 6" 18"
PSE21510-24 2" - 6" 24"
PSE21510-36 2" - 6" 36"
PSE21510-48 2" - 6" 48"
PSE21510-60 2" - 6" 60"
PSE21510-72 2" - 6" 72"
PSE21510-84 2" - 6" 84"
PSE21510-96 2" - 6" 96"
Premium Mitutoyo Digimatic LCD Readout Micrometer - Coolant Proof Digimatic Micrometer with dust/water protection conforming to IP65 level. The precision-welded bar is placed at 0.00 point for completely accurate measuring. LCD Digimatic Readout display. Allows precision measuring with 0.00005"/0.001mm graduation. Functions: Origin-set, Zero-setting, Automatic power on/off, Data hold, Data output, and inch/mm conversion. Optional accessories available upon request.

Micrometer
PART NO. SCREW O.D.
Imperial & Metric
*SMM-0 0" - 1" 0mm - 25.4mm
SMM-1 1" - 2"

25.4mm - 50.8mm

SMM-2 2" - 3"

50.8mm - 76.2mm

SMM-3 3" - 4"

76.2mm - 101.6mm

SMM-4 4" - 5"

101.6mm - 127mm

SMM-5 5" - 6"

127mm - 152.4mm

SMM-6 6" - 7"

152.4mm - 177.8mm

SMM-7 7" - 8"

177.8mm - 203.2mm

SMM-8 8" - 9"

203.2mm - 228.6mm

SMM-9 9" - 10"

228.6mm - 254mm

SMM-10 10" - 11"

254mm - 279.4mm

SMM-11 11" - 12"

279.4mm - 304.8mm

*Standard not included for SMM-0


sales@servicesforplastics.com | 1-800-627-1033 | www.servicesforplastics.com

Services For Plastics, Inc. is a manufacturer of barrels, screws, screw tip assemblies, nozzles, nozzle tips, and end caps for the plastic molding industry. We also distribute a complete line of industrial accessories for the injection, extrusion, thermoset, and blow-molding industries. In addition, we specialize in upsize/downsize conversions, thermoset/thermoplastic conversions, and reconditioning services for barrels and screws.
Copyright  1997-2017 Services For Plastics, Inc. All rights reserved.