FIT TO PRINT

August  2009

Desert DryŽ Desiccant is chemically superior 
to other brands, provides humidity-free 
air and won't break down under
extreme conditions.

 
When producing parts from hygroscopic materials, desiccant is absolutely necessary to dry the material to an appropriate moisture content. If your desiccant is not working properly, you will produce parts that have exterior visual defects and will have a loss of mechanical characteristics internally (tensile strength and flexural modulus for example). Nylon parts will become brittle, ABS will show silver streaking and Polycarbonate will have black specks.  Ultimately, these defective parts are recognized as scrap.  So when your scrap rates go up, you have to ask yourself, is your desiccant the cause.  Replacing 60 lbs of desiccant costs less than $225. That is nothing compared to the cost of producing bad parts. Most QS9000 and ISO9000 quality systems require replacement of desiccant every 12 months.

 When was the last time you changed your desiccant?

Do you Know How To Test Your Desiccant?
Click Here to View Video

Click Here for Instructions on Testing Your Desiccant




SERVICES FOR PLASTICS, INC.
Telephone:  800-627-1033 
Fax:  800-482-4059
Internet:  www.servicesforplastics.com
E-mail:  sales@servicesforplastics.com


SERVICES FOR PLASTICS is a manufacturer of barrels, screws, screw tips assemblies, nozzles, nozzle tips and end caps for the plastic molding industry. We also distribute a complete line of industrial accessories for the injection, extrusion, thermoset and blow molding industries. In addition, we specialize in upsize/downsize conversions, thermoset/thermoplastic conversions and reconditioning services for barrels and screws.

Copyright 1997-2017 Services For Plastics, Inc. All rights reserved.