Call Today 800-627-1033

 

Mica Heater Bands

Manufactured from Top Quality Mica Insulation & Materials


Standard Mica Heater Bands
Economical Mica Heater Bands
Adjustable Mica Heater Bands


Click Here for Technical Information About Mica Heater Bands


Heater Band Configurations:


Type A
Barrel Nut Strap
Metal (stainless steel armor) braid leads exit from both sides of gap.

Type A

 Type B
Barrel Nut Strap
Non-metal (fiberglass insulated) braid leads exit from both sides of gap.

Type B

 Type C
Barrel Nut Strap
Leads exit from one side of gap through outside surface of heater.
Options: 1, 2, 3

Type C

 Type D
Barrel Nut Strap
Leads exit from edge on opposite side from gap.
Options: 2, 3

Type D
Type E
Barrel Nut Strap
Leads exit from each side of gap through inside.
Options: 3

 

Type E

 Type F
Flange Lock-up
Leads exit from both sides of gap through edge.
Options: 2, 3

Type F

 Type G
Barrel Nut Strap
Metal braid leads exit from edge on one side of gap.

 

Type G

 Type H
Barrel Nut Strap
1 pc.; One post terminal on each side of gap.

 

 

Type H
Type I
Barrel Nut Strap
2 pc.; Post terminals at each end of heater.

 

Type I

Type J
Barrel Nut Strap
1 pc.; Two post terminals on one side of gap.

Type J

 Type K
Barrel Nut Strap
2 pc.; Two post terminals on each side of gap.

Type K

 Type L
Barrel Nut Strap
Expandable.
Options: 1, 2, 3, 16

 

Type L
Type M
Barrel Nut Strap
Cushioned clamping strap partially covers heater.
Options: 1, 2, 3, 16

 

 

Type M

 Type N
Flange Lock-up
1 pc.; Leads exit from one side of gap through outside surface of heater.
Options: 1, 2, 3

 

Type N

 Type O
Flange Lock-up
2 pc.; Leads exit from both sides of gap through outside surface of heater.
Options: 1, 2, 3

 

Type O

 Type P
Tapered Wedge Lock
Leads exit from both sides of gap through edge.
Options: 2, 3

Type P
Type Q
Flange Lock-up
Hinged; Post terminals at each end of heater.

Type Q

 Type R
Flange Lock-up
Hinged; Two post terminals on each side of gap.

Type R

 Type S
Flange Lock-up
Hinged; Leads exit from both sides of gap through outside surface of heater.

Type S

 Type T
Flange Lock-up
1 pc.; One post terminal on each side of gap.

Type T
Type U
Flange Lock-up
2 pc.; Post terminals at each end of heater.

Type U

 Type V
Flange Lock-up
1 pc.; Two post terminals on one side of gap.

Type V

 Type W
Flange Lock-up
2 pc.; Two post terminals on each side of gap.

Type W

 Type X
Extended Flange with Electrical Connections
1 pc.; Options: 1, 2, 3, 16

Type X
Type Y
Extended Flange with Electrical Connections
2 pc.; Options: 1, 2, 3, 16

Type Y

 Type Z
Hexagonal Band Heater
Leads exit from both sides of gap through edges.

Type Z

  

Optional Features:
  1. Flexible armor (BX) installed over flexible leads.
  2. Metal braid installed over flexible leads.
  3. Flexible leads (asbestos and fiberglass insulated nickel or nickel-clad conductor) installed with 2" fiberglass boot.
  4. Low profile band, presized for slip fit by installation of punch lock straps.
  5. Terminal box.
  6. Flexible armor in right angle bracket.
  7. Thermocouple hole.
  8. Button terminals.
  1. Appliance pins.
  2. Twist lock plug installed on leads.
  3. Extra wide gap (specify).
  4. Grounding stud.
  5. Dual voltage.
  6. Stainless steel sheath.
  7. Low profile strap (specify this option only if desired on sizes where not normally supplied).
  8. Post terminals.

Standard Mica Heater Bands

  • Many sizes and constructions in stock, or we can build a band to your specifications.
  • All construction types are stocked with 12" (length) leads, unless otherwise specified.
  • Standard barrel nuts (3/8" high) are normally supplied on bands 1½" I.D. or larger.
  • We supply a low profile barrel nut strap (7/32" high) on bands under 1½" I.D.
  • 1-year limited warranty.
  • Made in the U.S.A.

  • Purchase the best heater bands.

 

Click Here to View Part Numbers and Specifications

Type A Standard Mica Heater Band

Economical Mica Heater Bands


Economical Mica Heater Bands are designed primarily for nozzle and narrow width sizes. The primary design difference between the economical and the standard mica bands is the thinness of the economical bands.  This reduction in thickness not only contributes to the more economical pricing, but actually makes for a better heater (in the smaller sizes) by conforming more readily to the component being heated.  Economical Mica Heater Bands are available with all of the standard options and designs available on our Standard line of bands, and carry the same 1-year limited warranty.


Click Here to View Part Numbers and Specifications

Type B Economical Mica Heater Band

Adjustable Mica Heater Bands


Adjustable 2-pc. construction allows use of this band with a variety of I.D. sizes.
  • A good substitute for hard-to-find metric sizes.
  • Easy on/off -- other bands do not need to be removed for installation.
  • Dual voltage options for wiring flexibility.
  • Special barrel nut strap adjusts to fit a wider variety of I.D. sizes.



Click Here to View Part Numbers and Specifications

Adjustable Mica Heater Band - Type I

SFP heater bands are comparable with the following brands: Acrolab, Akinsun, Arico, ASB, Baba, Chetan, Chromalox, DElta Mfg., EZ Heat, Fast Heat, Gaumer, Glenn Electric, Heaton, Hitco, Hot Set, Hot Watt, HTS, Industrial Heater, Maathon, Navbharat, Ogden, Pratik, Pro Heat, Seema, tempco, Thermal, Thermal Devices, Watlow.


art element

Manufacturers of High-Quality Products for the Plastics Molding Industry

Home | Request a Quote | Product Index | Online Catalog | Barrels & Screws | Electrical Products | Hoses & Fittings | Molding Accessories | SDS Sheets | Credit Application | Terms & Conditions | About Us | Contact Us 
 

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
E-mail: Sales@ServicesForPlastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2025 | Services For Plastics, Inc. | All rights reserved. | Privacy Policy