|
Call Today 800-627-1033 |
|
|
|
|
||
 |
||
|
Call Today 800-627-1033 |
|
|
|
|
||
|
|
||
Better® Strip Heaters
Sealed Better® Strip Heaters
Ceramic Strip Heaters
Finned Strip Heaters
Ultima® Strip Heaters
Permaheat® Strip Heaters
Our line of strip heaters are made to exacting standards for efficient heat transfer and easy installation. Many constructions and configurations are available to fit almost any application (see descriptions below). Plus, we can supply custom strip heaters per your specifications. Purchase the best strip heaters.
Specifically designed for long life and a higher watt density operation. Each is able to sustain higher operating temperatures to meet the demands of the new engineering materials.
Packaging: Sold individually.
Similar to the Better® Strip in its ability to withstand high watt densities and high operating temperatures. In addition, its sheath has further protection from most contaminants, allowing for even greater durability.
Packaging: Sold individually.
Quality materials are used to provide high sheath temperatures. The heater consists of a stainless steel tube containing a high temperature ceramic insulating a nickel-chrome wire coil to provide a clean, dependable, versatile and efficient heat source for a wide range of applications. Magnesium oxide is used to fill all voids thus providing the best heat transfer.Simple-to-wire stainless steel screw terminals are securely anchored to prevent twisting out under normal conditions. Many terminal variations are available including waterproofing. Standard strip heater dimensions are 5/16" thick and 1˝" wide, and are available in many lengths.
Packaging: Sold individually.
Designed to provide excellent heat transfer to air. Fin strip heaters are available in a full range of sizes, wattages and voltage ranges. Typical applications for finned strip heaters include duct heaters, space heaters, drying ovens, and shrink tunnels.Available in Ultima® or Ceramic.
Packaging: Sold individually.
|
CERAMIC FINNED STRIP HEATERS |
|||
| PART NO. |
O.A.L. | VOLTS | WATTS |
| RL020252 | 10-1/2" | 120 | 725 |
| RL020223 | 10-1/2" | 240 | 725 |
| RL020385 | 12" | 120 | 900 |
| RL020383 | 12" | 240 | 900 |
| RL020386 | 14" | 120 | 1100 |
| RL020064 | 14" | 240 | 1100 |
| RL020228 | 15-1/4" | 120 | 1250 |
| RL020387 | 15-1/4" | 240 | 1250 |
| RL020388 | 17-7/8" | 120 | 1550 |
| RL020233 | 17-7/8" | 240 | 1550 |
| RL020389 | 19" | 120 | 1700 |
| RL020390 | 19" | 240 | 1700 |
| RL020391 | 21" | 120 | 1900 |
| RL020392 | 21" | 240 | 1900 |
| RL020533 | 23-3/4" | 120 | 2200 |
|
CERAMIC FINNED STRIP HEATERS |
|||
| PART NO. |
O.A.L. | VOLTS | WATTS |
| RL020309 | 23-3/4" | 240 | 2200 |
| RL020394 | 25-1/2" | 120 | 2400 |
| RL020395 | 25-1/2" | 240 | 2400 |
| RL020396 | 26-3/4" | 120 | 2500 |
| RL020397 | 26-3/4" | 240 | 2500 |
| RL020398 | 30-1/2" | 120 | 2800 |
| RL020015 | 30-1/2" | 240 | 2800 |
| RL020399 | 33-1/2" | 120 | 3150 |
| RL020400 | 33-1/2" | 240 | 3150 |
| RL020401 | 35-7/8" | 120 | 3450 |
| RL020326 | 35-7/8" | 240 | 3450 |
| RL020402 | 38-1/2" | 120 | 3700 |
| RL020323 | 38-1/2" | 240 | 3700 |
| RL020403 | 42-1/2" | 120 | 4150 |
| RL020179 | 42-1/2" | 240 | 4150 |
Terminal Position on all heaters in across the width of the heater.
1200°F Continuous Operation. Designed to withstand most corrosive environments, the Ultima's performance is above and beyond the norm. Constructed of heavy duty seamless stainless steel with welded stainless steel end caps, which results in a highly contamination and corrosion resistant heater. This seamless stainless steel construction eliminates distortion and deformation problems associated with higher temperatures that are common with other types of heaters. Cross section of the heater is 1˝" x 3/8" with fully rounded corners.Standard Ultima® Strip Heaters are manufactured to 40W/in2 heat capacity and 240 volt rating. In this manner tandem Ultima® strips or bands can be wired to 240 or 480 volt sources. These heaters can operate up to 1200°F continuous operation with one of the highest dielectric properties attainable in industrial applications today. Applications include: film die head heating, platen and vacuum forming machinery.
Packaging: Sold individually.
Excellent performance due primarily to its rugged construction. The elements are placed in a precisely extruded aluminum base. The aluminum body also serves as an excellent transfer medium for rapid heat-up while providing a uniform temperature throughout. Energy efficient and built to last.Packaging: Sold individually.
SFP strip heaters are comparable to the following brands: BH Thermal, Chromalox, CCI Thermal, Delta, DME, Durex, E-Z Heat, fast Heat, george Ulanet, Hampton, Heater Controls, Heatrex, heatron, Hot Set, Hotwatt, Industrial Heater, ITC, JAW, Marathon, Minco, OEM, Ogden, Omega, PPE, Precision Control, Pro Heat, Protherm, Rica, Seema, Tempco, Thermacraft, Therma-Tech, Thermal, Thermx, Tru-heat, Ulanet, Vulcan, Waage Electric, Watlow, Wattco.
Home | Request a Quote | Product Index | Online Catalog |
Barrels & Screws | Electrical Products | Hoses & Fittings |
Molding Accessories | SDS Sheets | Credit Application | Terms & Conditions | About Us | Contact Us
7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
E-mail: Sales@ServicesForPlastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2024 | Services For Plastics, Inc. | All rights reserved. | Privacy Policy
