Call Today 800-627-1033

 

 

Anti-Fatigue/Safety Floor Mats

 

Nyracord® is a durable, "almost indestructible" combination of tough fibers and rubber blended to give you the finest industrial floor matting on the market today.

Nyracord® matting withstands constant turning on heels and soles in confined areas.  Designed for foot and leg comfort, plus safety underfoot.  All of our Nyracord® mats have a ribbed underside to allow aeration and drainage to help prevent mildew.

Nyracord® Walk-EZ®
Walk-EZ® is a best buy for applications desiring a premium quality, long lasting, easy to clean anti-fatigue matting.  This multi-purpose mat will last up to 5 times longer than other rubber and vinyl runner mats.

Since Walk-EZ® will withstand temperatures of over 400°F, it can be used in welding, grinding, or machinery areas, places where other mats may tear, melt or rot.  Walk-EZ® requires minimum maintenance as dirt, moisture, and foreign particles will fall into the concave valleys below the walking surface.

  • Reversible for added traction on ramps or inclines.
  • Excellent traction surface even when wet.
  • Easy to clean with broom or sweeper.

Packaging:  Sold in 3' x 22' or 4' x 22' rolls

Nyracord Walk-EZ

Cross Section
Cross Section


PART
NO.
DESCRIPTION WIDTH LENGTH
AFM-2171 Standard Roll 3' 22'
AFM-2172 Standard Roll 4' 22'



Nyracord® EZ-Walk®
EZ-Walk® features a heavy duty smooth rubber surface bonded to a full ½" thick sponge rubber base.  Nyracord EZ-Walk® will withstand heavy wheeled cart and fork lift traffic without ripping, tearing or curling.  Beveled edges on all sides minimize tripping hazards.  Use in assembly areas, packaging areas, shipping/receiving stations, machine shops, warehousing areas, and other industrial work areas.
  • Heavy duty to withstand wheel traffic.
  • Beveled edges to minimize tripping hazards.
  • ½" thick sponge rubber base for comfort.

Packaging:  Sold in 3' x 22' or 4' x 22' rolls

Nyracord EZ-Walk

Cross Section
Cross Section


PART
NO.
DESCRIPTION WIDTH LENGTH
AFM-2360 Standard Roll 3' 22'
AFM-2365 Standard Roll 4' 22'

Available for Special Order Only

Nyracord® Counter Tred®
Counter Tred® is ideal for use in production, assembly, and heavy traffic areas.  The open slot design promotes safety by allowing foreign particles, oil, or moisture to drop through the mat.  Counter Tred® reduces fatigue allowing air to circulate underfoot.  The ribbed underside permits aeration and drainage for improved sanitation while ½" thickness allows mat to stay in place and prevents edges from curling.

Grease resistant Counter Tred® matting adapts itself perfectly to use around machinery in factories and machine shops.  It provides better footing where water, petroleum greases or oils cause slippery conditions.

  • Reduces fatigue.
  • Heavy duty ½" thick Nyracord® withstands wheel traffic.
  • Unique ribbed pattern for sure footing.
  • Promotes safety in wet or oily areas.
  • Also available in grease-resistant rolls.

Packaging:  Sold in 2' x 22', 3' x 22' or 4' x 22' rolls.

Nyracord Counter Tred

Cross Section
Cross Section


PART
NO.
DESCRIPTION WIDTH LENGTH
AFM-2000 Regular Roll 2' 22'
AFM-2002 Regular Roll 3' 22'
AFM-2003 Regular Roll 4' 22'
AFM-2032 Grease Resistant Roll 3' 22'
AFM-2033 Grease Resistant Roll 4' 22'

Also available with fully-closed slots




Click Here for More Information About Safety Mats

Click Here for More Information about Nyracord Safety Mats.

 

SFP anti-fatigue mats are comparable to the following brands: 3M, Airomat, Andersen, Arrow, ATD, Beacon, bennett, Bircher, cactus, Clarke, Comfort King, Crown, Cushion Trax, Diamond, Dri-Dek, Durable, Ecore, ESD, Humane, Industrial Ergonomics, Josco, Kamen, Kellett, Koneta, L.B. Plastics, Liberty, Mat Tech, Melmat, Mount Ville, North American mat, New Pig, Optima, Orthomat, Pandel, Performance, Protech, Rhino, Rubber-Cal, Rubbermaid, Safety Stance, Superior/NOTRAX, SlipNOT, Technical Specialties, Tepco, U.S. mat, Wearwell, Wirth.

Manufacturers of High-Quality
Products for the Plastics Molding Industry

Home | Request a Quote | Place an Order | Product Index | Online Catalog  
Barrels & Screws | Electrical Products | Hoses & Fittings | Molding Accessories | SDS Sheets
  Credit Application | Terms & Conditions | About Us | Contact Us 
 

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2023 Services For Plastics, Inc. All rights reserved.