E/Z Purge

This product has been discontinued. Please see our substitute purging products, here. Thank you

E/Z Purge® is an ammonia-free, water-based product that removes and cleans unwanted color, material or burned polymer from extruders, injection or blow molding equipment. Purging is a critical part of routine maintenance but costly in terms of system down time, wasted materials and labor costs. The efficient cleaning and purging action of E/Z Purge® enables you to make quick, complete changeovers from one color to another, and from one resin type to another. Down time is reduced because there is no need to strip down and manually clean deposits from melt passages. E/Z Purge® easily mixes with your own scrap resin to produce unsurpassed purging performance, eliminating the need to purchase more costly resin pellets for purging.

Water soluble - Safe on ALL hot runner manifolds and material types
Available in 3 levels: Standard, Heavy Duty and Super Duty
No odors, Ammonia-free
Leave in barrel as long as you want with no corrosive reaction
Non-abrasive cleaning
Using scrap material with E/Z Purge® is much less expensive than harsh purging chemicals
Non-toxic, non-flammable
Meets all safety requirements -- no hazardous chemicals

Now available in 3 levels for more aggressive cleaning capabilities:

Standard Duty
A quick, economical method to clean injection and blow molding machines and film and sheet extruders which are of a clean, smooth design with minimal changes of resin and routine, frequent cleaning. Works well with PE and PP.

Heavy Duty
Use where mold designs are more complicated, product runs are longer, color and resin changes more frequent. Works well with PP, PE, Nylon and Polyester. Mix with scrap or cast acrylic for a more aggressive purge.

Super Duty
Use where mold designs are more complicated, product runs are shorter, color and resin changes more frequent. Works well with more rigid materials, PVC, Nylon and Polycarbonate and especially with molds prone to produce burnt polymer. Mix with scrap or cast acrylic for a more aggressive purge.

Packaging: Sold in 1 qt. bottles or 5 gallon pails.

DESCRIPTION	PART NO.	SIZE
Standard Duty	EZP-1	1 qt.
Standard Duty	EZP-1-5	5 gal.
Heavy Duty	EZP-1HD	1 qt.
Heavy Duty	EZP-1HD-5	5 gal.
Super Heavy Duty	EZP-1S	1 qt.
Super Heavy Duty	EZP-1S-5	5 gal.

Our purging compound is comparable with the following brands: Asaclean, Bamberger, Cleanplast, Eko, Gator Purge, Grange, Lakos, Neutrex, Vovachem, PTS, Purge-USA, Rapid Purge, RBM, Slide, Spartech, Ultrapurge, XPD8.

Manufacturers of High-Quality
Products for the Plastics Molding Industry

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2024 | Services For Plastics, Inc. | All rights reserved. | Privacy Policy