Call Today 800-627-1033

 

Van Dorn Demag Screw Tip Assemblies

 

Van Dorn/Demag Molding Machines


Model No.
EI-Exis SP ultra-high-speed hybrid, SE7M, SE18DUZ, SE30DUZ, SE50DUZ, SE75DUZ, SE100DUZ, SE130DUZ, SE180DUZ, SE18DUZ-HD, SE30DUZ-HD, SE50DUZ-HD, SE75DUZ-HD, SE100DUZ-HD, SE130DUZ-HD, SE180DUZ-HD, SE50EV-A, SE75EV-A, SE100EV-A, SE130EV-A, SE180EV-A, SE50EV, SE75EV, SE100EV, SE130EV, SE180EV, SE100EV-HD, SE130EV-HD, SE180EV-HD, SE220EV-AHD, SE250EV-AHD, SE280EV-AHD, SE315EV-AHD, SE350EV-AHD, SE385EV-AHD, SE450EV-AHD, SE500EV-AHD, SE220HSZ, SE280HSZ, SE350HSZ, SE280HSZ PACK, SE350HSZ PACK, SE220HDZ, SE280HDZ, SE350HDZ, SE450HDZ, SE230HS-CI, SE280HS-CI, SE75D-CI, SR-Z, SR100H, SR75Z, SV18, SV18M, SV50, SV50M, Systec SP high-speed hybrid, Systec 35/320-35, Systec 35/320-120, Systec 35/320-200, Systec 50/370-80, Systec 50/370-120, Systec 50/370-200, Systec 50/370-310, Systec 60/420-200, Systec 60/420-310, Systec 60/420-430, Systec 80/420-200, Systec 80/420-310, Systec 80/420-430, Systec 100/420-200, Systec 100/420-310, Systec 100/420-430, Systec 100/420-600, Systec 120/470-310, Systec 120/470-430, Systec 120/470-600, Systec 160/520-310, Systec 160/520-430, Systec 160/520-600, Systec 160/520-840, Systec 210/580-430, Systec 210/580-600, Systec 210/580-840, Systec 210/1450, Systec 280/630-600, Systec 280/630-840, Systec 280/630-1450, Systec 280/630-2300, Systec 350/720-600, Systec 350/720-840, Systec 350/720-1450, Systec 350/720-2300, Systec 420/820-840, Systec 420/820-1450, Systec 420/820-2300, Systec 420/820-3300, Systec 500/920-2300, Systec 420/820-3300, Systec 420/820-6400, Systec 650/1020-3300, Systec 650/1020-6400, Systec 650/1020-9500, Systec 800/1120-6400, Systec 800/1120-9500, Systec 1000/1400-6400, Systec 1000/1400-9500, Systec 1000/1400-11500, Systec 1000/1400-16000, Systec 1300/1500-9500, Systec 1300/1500-11500, Systec 1300/1500-16000, Systec 1500/1500-11500, Systec 1500/1500-16000, Systec 2000/1800-11500, Systec 2000/1800-16000

Bore Sizes
18mm Van Dorn/Demag STA, 22mm Van Dorn/Demag STA, 25mm Van Dorn/Demag STA, 28mm Van Dorn/Demag STA, 30mm Van Dorn/Demag STA, 32mm Van Dorn/Demag STA, 35mm Van Dorn/Demag STA, 38mm Van Dorn/Demag STA, 40mm Van Dorn/Demag STA, 45mm Van Dorn/Demag STA, 50mm Van Dorn/Demag STA, 52mm Van Dorn/Demag STA, 57mm Van Dorn/Demag STA, 60mm Van Dorn/Demag STA, 65mm Van Dorn/Demag STA, 69mm Van Dorn/Demag STA, 70mm Van Dorn/Demag STA, 75mm Van Dorn/Demag STA, 80mm Van Dorn/Demag STA, 82mm Van Dorn/Demag STA, 90mm Van Dorn/Demag STA, 95mm Van Dorn/Demag STA, 105mm Van Dorn/Demag STA, 110mm Van Dorn/Demag STA, 115mm Van Dorn/Demag STA, 120mm Van Dorn/Demag STA, 130mm Van Dorn/Demag STA, 135mm Van Dorn/Demag STA, 145mm Van Dorn/Demag STA, 155mm Van Dorn/Demag STA, 180mm Van Dorn/Demag STA

Injection Units
All-Electric, HIGH-SPEED / PACKAGING, HYDRAULIC MACHINES

 

 

If you're buying all of your screw tip assemblies from the O.E.M., you're paying too much! Services for Plastics, Inc. screw tip assemblies are made from significantly higher quality tool steels than available through the O.E.M. Along with better quality, SFP provides customized designing of the screw tip assembly to successfully work with your brand of molding machine and type of application. And SFP offers them at significantly lower prices than the O.E.M. can offer. SFP screw tip assemblies are the BEST VALUE in the industry!

We stock a wide variety of brands,, plus we also can manufacture any screw tip assembly. Using your sample tip assembly, your print or a print from our extensive library, we will manufacture a screw tip assembly to match your specific requirements. Services for Plastics, Inc. screw tip assemblies are available in a wide variety of tool steels to match your application.

 

               
The following brands of tip assemblies are in stock and ready to ship.
Arburg
ATEC
Autojector
Battenfeld
Beloit
Bipel
Borche
Boston Matthews
Boy
Bucher
Chuan Lih Fa
Cincinnati
Cincinnati ACT / Roboshot
Cincinnati Roboshot
Cincinnati Vista
Cincinnati Vista Sentry
Demag
Desma
Dima
Dong Shin
Egan
Engel
Farrel
Fellows
Ferromatik
Fortune
Fu Chun Shin
Gloenco
Gloucester
Gluco
Goldstar
Haitian
Hettinga
Hishiya
HPM
Hull
Husky
Illinois Precision
Impco
Jaco
Johns
Jomar
JSW
Kawaguchi
Kenplas
Klockner Ferromatik
Klockner Windsor
Krauss-Maffei
Kuasy
Lester
Lien Fa
Lombard
Maplan
Martinand
McNeil
Meiki
Metalmec
Mini-jector
MIR
Mitsubishi
Moslo
Multiplas
Natco
Negri Bossi
Netstal
New Britain
Newbury
Niigata
Nissei
Nissin
Pentaject
Presma
Promax
Pyramid
Reed Prentice
Rutil
Sandretto
Seiko
Shinwa
Seiki
Sodick
Stokes
Stork
Stubbe
Sumitomo
TMC
Toshiba
Toyo
Triulzi
Trubor
Trueblood
UBE
Van Dorn
Van Dorn / Demag
Van Dorn / GT

Wabash MPI
Welltec
Willert
Windsor
YCI - Supermax

If you don't see what you are looking for, please contact us at sales@servicesforplastics.com or phone us at 1-800-627-1033.

We can make any screw tip assembly!

We have an extensive CAD library consisting of thousands of prints for screw tips, barrels, screw, nozzles, end caps, etc. If you need a quote and there isn't a print available, simply send us a used sample part and specify what material you want the new one made from. (Hint: Always save your original screw tip assemblies. They are valuable for verification of dimensions when ordering new assemblies.)

No one check valve design is perfect for every application; therefore, we offer three distinct designs to ensure the proper component for your application.


Design Options:

ACCU-FLO™ Design

Advantages:

• Excellent Design for Most Plastics
• Good for Color Mixing
• Good Shut-off
• Faster Screw Recovery - Less Heat Build-up
• Possibility of Faster Cycles
• 3-Piece Design

Improved Designs With Non-Rotating Rings For These Popular Brands:

- Cincinnati ACT / Roboshot
- Goldstar
- JSW
- Kawaguchi
- Mitsubishi
- Nissei
- Nissin
- Sumitomo
- Toshiba
- Toyo

OEM Design

Advantages:

• Good Design for Most General Purpose Materials
• Excellent Shut-off
• Excellent for Small Precise Shots
• OEM Compatible
• Rotating Ring Design Where Applicable
• All the Best Characteristics of OEM plus custom-designed enhancements to improve
overall performance
• 3-Piece Design

4-Piece Design

Advantages:

• Ideal for high abrasion materials
• Alloy Tool Steel Nitrided
• Carbide Faced
• Ceramic Faced
• 4-Piece Design

 

Material Options:

H-13 Tool Steel
A good high strength pre-hardened tool steel which is machined, thru-hardened, and ground dimensionally, then nitride hardened for 72 hours for better wear resistance. H-13 is tough and can handle pressure and torque.

D-2 Tool Steel
A high carbon/high chrome tool steel with good wear resistance, but low on torque strength. D-2 should only be used with 4-piece designs where the stud is manufactured from 4140, H-13 or another high torque steel.

CPM®-9V Tool Steel
A new generation tool steel with a high percentage of vanadium carbide developed for high wear (abrasive) applications. It resists wear from abrasive fillers in resin. (Construction: Carbon 1.8%, Manganese 0.50%, Silicon 0.9%, Chromium 5.25%, Molybdenum 1.3%, Vanadium 9.0%.)

CPM®-420V Tool Steel
Crucible's CPM
®-420V is a new stainless tool steel best suited for corrosion resistant applications. CPM®-420V is a higher performance upgrade from CPM®-440V. Corrosion resistance is significantly better than CPM®-440V. Wear resistance is about 25-50% better than CPM®-440V, due to the higher vanadium carbide content of CPM®-420V (9% vanadium vs. 5.5-6% in CPM®-440V).

CPM®-M4 Tool Steel
Crucible's CPM
®-M4 is a high vanadium, special purpose, high speed steel exhibiting better wear resistance and toughness than D-2 or CPM®-9V. CPM®-M4 has a hardness rating of 64.0. (Construction: Carbon 1.42%, Chromium 4.0%, Vanadium 4.0%, Tungsten 5.5%, Molybdenum 5.25%.)

• • • • •

For price quotation and delivery - call us with the machine make and type of screw tip assembly you want.  It's quick and convenient, so request a quote today!

Back to Top

Manufacturers of High-Quality
Products for the Plastics Molding Industry

Home | Request a Quote | Place an Order | Product Index | Online Catalog  
Barrels & Screws | Electrical Products | Hoses & Fittings | Molding Accessories | SDS Sheets
  Credit Application | Terms & Conditions | About Us | Contact Us 
 

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 1997-2024 | Services For Plastics, Inc. | All rights reserved. | Privacy Policy