Cleaning Supplies for
Feedscrews and Barrels

Brass Scrapers

• Solid brass blades for non-abrasive scraping
• Polypro molded handle for comfort and durability
• Beveled front edges for better scraping
• Non-corrosive, non-sparking, non-magnetic
• Available with 1¼" or 3" straight blade or 1¼" 45° angled blade
• Made in the U.S.A.
• All of your cleaning needs can be purchased from PS&E

Packaging:  Sold individually.

Copper Gauze    

Click here for technical tips on Copper Gauze

• Tough interlocking loops won't pull apart.
• Heavy weight .004" x .025"
• Safe, soft copper wire won't scratch surfaces
• Non-flammable
• Pure copper won't rust or contaminate
• Knitted mesh keeps flat wire on edge for scraping
• Reversible mesh - medium grade mesh on outside, turn inside out for heavy cleaning coarse mesh

Packaging:  Sold in 5" x 100' rolls. 10 rolls/case.

Poly-brite Abrasive Pads

• Washable and reusable
• Easy on the hands
• Replaces steel wool with no rusting, splintering or contamination
• Adaptable to both hand or machine finishing

Packaging:  Sold in 6" x 9" pads; available in a variety of densities and colors.

Brass Brushes

1. Curved Handle - Large: 13" x 7/8", fine brass wire, wood handle
2. Shoe Handle: 10" x 7/8", fine brass wire, wood handle
3. Curved Handle - Small:  8-5/8" x 1/2", fine brass wire, wood handle
4. Tooth Brush: 7-7/8" x 1/2", fine brass wire, wood handle
5. Hand Brush: 2-1/2" x 4-1/4", brass wire, wood block

Packaging:  Sold individually.

Bore Cleaning Brushes

• Brush length:  4½"
• Overall length:  8"
• Thread size:  ¼ NPT
• Barrel diameters: From 3/4" to 4" and from 18mm to 100mm
• Wire size: .0118

Packaging:  Sold individually.

*Note: Single spiral, double stem with wire size of .030".

Bore Brush Twisted Steel Extension Rod

• 4' or 6' Twisted Steel Rod with Fittings
• Thread size:  Male ¼ NPT

Packaging:  Sold individually.

T-Handle Extension

• Designed for use with Twisted Steel Extension Rod
• Dimensions:  4" x 2½"
• Thread size:  Male ¼ NPT

Packaging:  Sold individually.

Brass Tube Cleaning Brushes

• Brush diameters: From 1/4" to 3/4"
• Overall length:  12"

2. Hand Held
For manual or hand cleaning applications.  Ideal for internal cleaning in hard-to-reach areas. Ideal for use on nozzles, cartridge heater holes and mold cavity holes.

• Brush diameters: From 1/8" to 1"
• Brush lengths:  From 1" to 3"
• Overall lengths:  From 6" to 10"

Packaging:  Sold individually.

Single Spiral Tube Brushes

• Steel or brass bristles
• Ejector pin holes
• ½" O.D. x 7½" O.A.L.
• O.D. Thread: 1/8" NPT
• I.D. Thread:  5/16-18

*Steel bristles not recommended for use on nozzles manufactured from soft materials. Use steel bristle brushes on thru-hardened, heat treated nozzles only.

Packaging:  Sold individually.

Brass Cup Brushes

• Heavy duty brush construction
• Won't flatten or spread during use
• Maximum wire density
• Great for mold & die cavities
• Diameters: From 1-3/4" to 2-1/2"
• Shank diameter: 1/4"
• Wire sizes: From 0.006" to 0.012"

Packaging:  Sold individually.

Copper Center Brass Brushes

• High density bristle fill for maximum surface contact
• High speed efficiency per thousand rpm with portable or fixed power tools
• Designed to operate at 20,000 rpm
• Diameters: From 2" to 4"
• Wire sizes: From 0.006" to 0.014"
• Arbor holes: From 1/2" to 5/8"
• Face width: From 1/4" to 9/32" 

Packaging:  Sold individually.
Metal drivers and plastic adapters also available.  

Copper Center Brass Brush - Metal Driver

Copper Center Brass Brush - Plastic Adapter