Click here for Technical Information about Machine Mounts
Easy Installation Mounts attach quickly for original installation of equipment or when moving machinery from one place to another. No drilling, cementing or bolting machines to the floor. Just attach the mount, adjust the leveling bolt and tighten.
The dampening effect of our machine mounts provides up to 80% reduction in transmitted vibrations.
Precise Leveling The precision fit between the leveling plate and the rugged base leaves no room for horizontal sway. Horizontal forces and vibration are transmitted directly to the shock absorbing rubber sole.
Meet OSHA Anchoring Requirements The neoprene rubber sole provides excellent friction against creeping or walking to comply with OSHA anchoring requirements.
Noise Reduction The significant vibration reduction contributes to improved working conditions in surrounding areas. Reduction of noise at critical dB levels can, in some instances, permit compliance with OSHA noise level standards in a most economical manner.
Rapid, Economical Machinery Location Because equipment mounted on machine mounts is "off the floor" and easy to pick up and move, significant savings in both time and money can be achieved when machinery is relocated. Re-leveling is easy.
Lift machine and slide mount into position.
Put leveling bolt through hole in base of machine and thread into mount. Lower machine.
Level machine by turning leveling bolt. (Turning the bolt will raise or lower the leveling plate.)
Put on washer and lock nut. Tighten.
SFP Machine Mounts are comparable with most major brands of machine/leveling mounts including:
7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems
Copyright 1997-2023 Services For Plastics, Inc. All rights reserved.